Shure BETA 91A 4x3.png
Recording

Shure Beta 91A Half-Cardioid Condenser Microphone: Click for more information

499.00

Call us or visit us in-store for more information on this product and our best price!

1300 853 358

The Shure BETA®91A is designed for use with kick drums, as well as other traditional low-frequency applications including piano. Featuring an updated microphone capsule, integrated preamplifier, and XLR connection, Beta 91A offers a strong low-frequency response and is specifically tailored for bass frequency applications. The Beta 91A combines superior attack and punch for studio-quality sound, even at extremely high sound pressure levels (SPL).

Features

  • Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
  • Precision-engineered low-profile design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter
  • Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
  • Two-position contour switch to maximize attack and clarity depending on application: select the flat response setting for natural sound in most applications or the “low-mid scoop” setting for a strong low frequency “punch” with plenty of higher frequency attack
  • Requires no external mounting or accessories for ease of use and storage
  • Furnished with zipper pouch

24 Hour Dispatch on all Products (Subject to Supplier Availability). To Confirm Availability Call us on 1300 853 358

Add To Cart
Shure BETA 91A 4x3.png

Additional Info

Specs and Features

  • Type: Electret Condenser
  • Frequency Response: 20Hz-20kHz
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Impedance: 146 Ohms
  • Sensitivity (at 1kHz, open circuit voltage): -48.5 dBV/Pa (3.8mV)
  • Maximum SPL ( kHz at 1% THD): 1,000 ohm load: 151dB; 2500 Ohm load: 155dB
  • Signal-to-Noise Ratio (referenced at 94 dB SPL at 1kHz): 64 dB
  • Dynamic Range (at 1kHz): 1,000 Ohm load: 121.5dB; 2500 Ohm load: 125.5dB
  • Common Mode Rejection (20Hz-20kHz): >55dB
  • Clipping Level (20Hz-20 kHz at 1% THD) 1,000 ohm load: 7.50dBV, 2,500 ohm load: 12.5dBV
  • Self Noise (typical, equivalent SPL, A-weighted): 29.5dB SPL-A
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Weight: 16.6 oz.
  • Frequency Contour Switch: 7dB of attenuation centered at 400Hz
  • Connector: 3-pin XLR, balanced
  • Power Requirements: 11-52 Vdc phantom power, 5.6 mA